Retrofit Water Saving Toilet Fill Valve, August 31, 2010

Jason P. Wilmot (SE Mass)

Great product that stands out from the competition due to not having to remove the tank to install. Most of the dual flush valves require removing the tank to remove the original flapper valve seat. Not too big a deal, but I just did not want to take a chance on one of these dual flush valves if it was going to be any hassle.

I installed this on an original to the house 1960 toilet. It installed easily, but I could not get the bowl to fill on the #1 flush even after the #1 flush adjustment was maxed out. This problem was solved by installing the adjustable fill valve that is recommended to buy with this product.

After installing the adjustable fill valve and a few minutes tweaking the settings it works great.

Buying a modern water saving toilet is definitely the right way to go, but if like me, you don't have the several hundred dollars to lay out for a new toilet, this is a great alternative

Decent product, August 29, 2010

I got it to work, but it took a while to make sense of the directions (but that might just be because of my unfamiliarity with toilet tank parts). Also, I had to extend the height of my overflow tube since the one originally in my toilet was way too short. The "Light Flush" button is a little hard to push all the way in. Otherwise, functions as promised and overall I'm satisfied with the results.

Works like a charm, July 15, 2010

D. Brown (delaware, oh USA)

Purchased one of these for an older (early 1991) American standard Toilet. This is one of the old style water wasting toilets and I won't ever change if i don't have to. This attaches to the filler tube and can be mounted with the green foam float on the chain or in the flapper. Putting it in the flapper is aimed at the older toilets and on the chain is for the new water saving style. Its from the same people who build the hydroright water saving #1 or #2 flush product and this does what it says.

SImple to setup, June 30, 2010

This was simple to install! Getting the old one off was a pain.. this one went on with NO tools. Smart design and works very well.

Easy to install and easy to adjust in minutes, March 27, 2010

R. Sakala

Put this into my tank in minutes, without tools. I love the valve to control the water fill, which I had tried to do myself a few years ago with zip ties, etc. Such simple things for great water savings.